DR-H4 is an ultra-wideband portable drone detector covering 300 MHz–13.4 GHz. It detects over 100 drone types, including mainstream consumer drones, analog FPV and digital FPV platforms such as Walksnail and BETAFPV P1. Remote ID reception and real-time spectrum monitoring provide additional drone identification and RF signal information.
Frequency Coverage: 300 MHz–13.4 GHz
Drone Detection: 100+ Types, Including FPV
Category:
Detection
Share:
Key Features
Technical Specifications
Environmental Adaptability
Full-Spectrum Detection
Covers 300 MHz–13.4 GHz with 1 MHz frequency steps, enabling wideband spectrum scanning and real-time display of detected drone type, frequency and signal strength.
Multi-Platform & Multi-Protocol Detection
Detects DJI, Autel, FIMI and Hubsan platforms; analog FPV; digital FPV platforms including Walksnail and BETAFPV P1; and Wi-Fi drones including Xiaomi, Tello and ZLL.
Long-Range Detection
RF sensitivity down to -101 dBm and a detection range of up to 5 km. Actual range varies with frequency band and drone transmission power.
Remote ID Reception
Supports Wi-Fi and Bluetooth Remote ID reception, with support for GB 46750-2025, ASTM F3411-22a and ASD-STAN PrEN 4709-002.
Manpack Jammer Integration
Provides an external interface for integration with manpack jamming systems, enabling coordinated drone detection and jamming.
IP54 Protection
An IP54-rated enclosure protects against dust ingress and water splashes for outdoor operation.
Replaceable Battery
A removable lithium-ion battery provides approximately 6 hours of operation per battery and supports USB Type-C charging.
Bluetooth Data Transmission
Supports real-time wireless data transmission via Bluetooth for remote monitoring and data management.
Frequency Range
300 MHz–13.4 GHz
Effective Range
500 m–5 km. Actual range may vary depending on frequency band and drone transmission power.
Detection & Identification
DJI, Autel, FIMI, Hubsan, analog FPV, digital FPV (Walksnail and BETAFPV P1), and Wi-Fi drones (Xiaomi, Tello and ZLL).
Remote ID (RID)
2.4 GHz Wi-Fi, 5.8 GHz Wi-Fi and 2.4 GHz Bluetooth; supports GB 46750-2025, ASTM F3411-22a and ASD-STAN PrEN 4709-002.
Alert Methods
Vibration and audible alarm
Log Recording
Built-in storage
Battery Runtime
Approx. 6 hours (single battery)
Power Supply & Charging
Removable lithium-ion battery; USB Type-C charging
Data Interface
USB Type-C
Operation
Physical buttons; adjustable volume and screen backlight; drone detection information viewing
Weight
< 550 g
Dimensions
< 164 × 44 × 68 mm
Operating Temperature
0°C to +55°C
Protection Rating
IP54
RF Safety Note
Keep away from radar stations, jammers and other high-power RF sources to prevent potential device damage.